@FreewheelinFrank
I have done some tests this morning:
→ purged cups-browsed ad you suggested;
→ added a print queue name with
Code:
sudo lpadmin -p EPSON_WF-2630_Series -v ipp://192.168.43.101 -E→ added the print in system-config-printer desuming the necessary datas from
Code:
avahi-browse -rt _ipp._tcpNow, the printer in properties shows inks level again!
Print test (negative).
Then, I've read
Code:
sudo cat /var/log/cups/error_logthe output of this command is very (very) long, I copy only an extract (it repeats the same values several times, I suppose because there are various printing attempts):
Code:
D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 12] POST /printers/Epson-WF-2630 HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 12] Read: status=200, state=6D [07/Feb/2026:12:28:13 +0100] [Client 12] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 12] 2.0 Get-Printer-Attributes 5513D [07/Feb/2026:12:28:13 +0100] Get-Printer-Attributes ipp://localhost/printers/Epson-WF-2630D [07/Feb/2026:12:28:13 +0100] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Epson-WF-2630) from localhost.D [07/Feb/2026:12:28:13 +0100] [Client 12] Content-Length: 140D [07/Feb/2026:12:28:13 +0100] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:13 +0100] [Client 12] con->http=0x55910f13cce0D [07/Feb/2026:12:28:13 +0100] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=140, response=0x55910f187440(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:13 +0100] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:13 +0100] [Client 12] bytes=0, http_state=0, data_remaining=140D [07/Feb/2026:12:28:13 +0100] [Client 12] Flushing write buffer.D [07/Feb/2026:12:28:13 +0100] [Client 12] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:13 +0100] [Client 12] Waiting for request.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 15] POST / HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 15] Read: status=200, state=6D [07/Feb/2026:12:28:13 +0100] [Client 15] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 15] 2.0 Get-Printer-Attributes 5514D [07/Feb/2026:12:28:13 +0100] Get-Printer-Attributes ipp://localhost/printers/Epson-WF-2630D [07/Feb/2026:12:28:13 +0100] [Client 15] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Epson-WF-2630) from localhost.D [07/Feb/2026:12:28:13 +0100] [Client 15] Content-Length: 39834D [07/Feb/2026:12:28:13 +0100] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:13 +0100] [Client 15] con->http=0x55910f140440D [07/Feb/2026:12:28:13 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=39834, response=0x55910f0ccf30(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:13 +0100] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:13 +0100] [Client 15] bytes=0, http_state=0, data_remaining=39834D [07/Feb/2026:12:28:13 +0100] [Client 15] Flushing write buffer.D [07/Feb/2026:12:28:13 +0100] [Client 15] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:13 +0100] [Client 15] Waiting for request.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 4706] Server address is "/run/cups/cups.sock".D [07/Feb/2026:12:28:13 +0100] [Client 4706] Accepted from localhost (Domain)D [07/Feb/2026:12:28:13 +0100] [Client 4706] Waiting for request.D [07/Feb/2026:12:28:13 +0100] [Client 4706] GET /printers/Epson-WF-2630.ppd HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 4706] Read: status=200, state=3D [07/Feb/2026:12:28:13 +0100] [Client 4706] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 4706] Processing GET /printers/Epson-WF-2630.ppdD [07/Feb/2026:12:28:13 +0100] [Client 4706] filename="/etc/cups/ppd/Epson-WF-2630.ppd", type=application/vnd.cups-ppdD [07/Feb/2026:12:28:13 +0100] [Client 4706] cupsdSendHeader: code=304, type="(null)", auth_type=0D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 4706] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)D [07/Feb/2026:12:28:13 +0100] [Client 4706] Closing connection.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 12] POST /printers/Epson-WF-2630 HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 12] Read: status=200, state=6D [07/Feb/2026:12:28:13 +0100] [Client 12] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 12] 2.0 Get-Printer-Attributes 5515D [07/Feb/2026:12:28:13 +0100] Get-Printer-Attributes ipp://localhost/printers/Epson-WF-2630D [07/Feb/2026:12:28:13 +0100] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Epson-WF-2630) from localhost.D [07/Feb/2026:12:28:13 +0100] [Client 12] Content-Length: 140D [07/Feb/2026:12:28:13 +0100] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:13 +0100] [Client 12] con->http=0x55910f13cce0D [07/Feb/2026:12:28:13 +0100] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=140, response=0x55910f0cbf00(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:13 +0100] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:13 +0100] [Client 12] bytes=0, http_state=0, data_remaining=140D [07/Feb/2026:12:28:13 +0100] [Client 12] Flushing write buffer.D [07/Feb/2026:12:28:13 +0100] [Client 12] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:13 +0100] [Client 12] Waiting for request.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 4692] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)D [07/Feb/2026:12:28:13 +0100] [Client 4692] Closing connection.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 4707] Server address is "/run/cups/cups.sock".D [07/Feb/2026:12:28:13 +0100] [Client 4707] Accepted from localhost (Domain)D [07/Feb/2026:12:28:13 +0100] [Client 4707] Waiting for request.D [07/Feb/2026:12:28:13 +0100] [Client 4707] GET /printers/Epson-WF-2630.ppd HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 4707] Read: status=200, state=3D [07/Feb/2026:12:28:13 +0100] [Client 4707] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 4707] Processing GET /printers/Epson-WF-2630.ppdD [07/Feb/2026:12:28:13 +0100] [Client 4707] filename="/etc/cups/ppd/Epson-WF-2630.ppd", type=application/vnd.cups-ppdD [07/Feb/2026:12:28:13 +0100] [Client 4707] cupsdSendHeader: code=304, type="(null)", auth_type=0D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 4707] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)D [07/Feb/2026:12:28:13 +0100] [Client 4707] Closing connection.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 10] POST / HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 10] Read: status=200, state=6D [07/Feb/2026:12:28:13 +0100] [Client 10] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 10] 2.0 CUPS-Get-Printers 5516D [07/Feb/2026:12:28:13 +0100] CUPS-Get-PrintersD [07/Feb/2026:12:28:13 +0100] [Client 10] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.D [07/Feb/2026:12:28:13 +0100] [Client 10] Content-Length: 520D [07/Feb/2026:12:28:13 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:13 +0100] [Client 10] con->http=0x55910f12e560D [07/Feb/2026:12:28:13 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=520, response=0x55910f17c5a0(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:13 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:13 +0100] [Client 10] bytes=0, http_state=0, data_remaining=520D [07/Feb/2026:12:28:13 +0100] [Client 10] Flushing write buffer.D [07/Feb/2026:12:28:13 +0100] [Client 10] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:13 +0100] [Client 10] Waiting for request.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 10] POST / HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 10] Read: status=200, state=6D [07/Feb/2026:12:28:13 +0100] [Client 10] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 10] 2.0 CUPS-Get-Classes 5517D [07/Feb/2026:12:28:13 +0100] CUPS-Get-ClassesD [07/Feb/2026:12:28:13 +0100] [Client 10] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.D [07/Feb/2026:12:28:13 +0100] [Client 10] Content-Length: 75D [07/Feb/2026:12:28:13 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:13 +0100] [Client 10] con->http=0x55910f12e560D [07/Feb/2026:12:28:13 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55910f17d6a0(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:13 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:13 +0100] [Client 10] bytes=0, http_state=0, data_remaining=75D [07/Feb/2026:12:28:13 +0100] [Client 10] Flushing write buffer.D [07/Feb/2026:12:28:13 +0100] [Client 10] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:13 +0100] [Client 10] Waiting for request.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 10] POST / HTTP/1.1D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:13 +0100] [Client 10] Read: status=200, state=6D [07/Feb/2026:12:28:13 +0100] [Client 10] No authentication data provided.D [07/Feb/2026:12:28:13 +0100] [Client 10] 2.0 CUPS-Get-Default 5518D [07/Feb/2026:12:28:13 +0100] CUPS-Get-DefaultD [07/Feb/2026:12:28:13 +0100] [Client 10] Returning IPP successful-ok for CUPS-Get-Default (no URI) from localhost.D [07/Feb/2026:12:28:13 +0100] [Client 10] Content-Length: 39834D [07/Feb/2026:12:28:13 +0100] [Client 10] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:13 +0100] [Client 10] con->http=0x55910f12e560D [07/Feb/2026:12:28:13 +0100] [Client 10] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=39834, response=0x55910f17c5a0(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:13 +0100] [Client 10] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:13 +0100] [Client 10] bytes=0, http_state=0, data_remaining=39834D [07/Feb/2026:12:28:13 +0100] [Client 10] Flushing write buffer.D [07/Feb/2026:12:28:13 +0100] [Client 10] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:13 +0100] [Client 10] Waiting for request.D [07/Feb/2026:12:28:13 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] Get-Printer-Attributes: successful-ok (successful-ok)D [07/Feb/2026:12:28:14 +0100] [Job 58] copies-supported=1-99D [07/Feb/2026:12:28:14 +0100] [Job 58] document-format-supported (4 values)D [07/Feb/2026:12:28:14 +0100] [Job 58] [0] = \"application/octet-stream\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [1] = \"image/pwg-raster\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [2] = \"image/urf\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [3] = \"image/jpeg\"D [07/Feb/2026:12:28:14 +0100] [Job 58] media-col-supported (7 values)D [07/Feb/2026:12:28:14 +0100] [Job 58] [0] = \"media-size\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [1] = \"media-top-margin\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [2] = \"media-left-margin\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [3] = \"media-right-margin\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [4] = \"media-bottom-margin\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [5] = \"media-type\"D [07/Feb/2026:12:28:14 +0100] [Job 58] [6] = \"media-source\"D [07/Feb/2026:12:28:14 +0100] [Job 58] operations-supported (9 values)D [07/Feb/2026:12:28:14 +0100] [Job 58] [0] = Print-JobD [07/Feb/2026:12:28:14 +0100] [Job 58] [1] = Validate-JobI [07/Feb/2026:12:28:14 +0100] Expiring subscriptions...D [07/Feb/2026:12:28:14 +0100] [Job 58] [2] = Create-JobD [07/Feb/2026:12:28:14 +0100] [Job 58] [3] = Send-DocumentD [07/Feb/2026:12:28:14 +0100] [Job 58] [4] = Cancel-JobD [07/Feb/2026:12:28:14 +0100] [Job 58] [5] = Get-Job-AttributesD [07/Feb/2026:12:28:14 +0100] [Job 58] [6] = Get-JobsD [07/Feb/2026:12:28:14 +0100] [Job 58] [7] = Get-Printer-AttributesD [07/Feb/2026:12:28:14 +0100] [Job 58] [8] = Identify-PrinterD [07/Feb/2026:12:28:14 +0100] [Job 58] update_reasons(attr=1(marker-supply-low-warning), s=\"(null)\")D [07/Feb/2026:12:28:14 +0100] [Job 58] ATTR: marker-colors=\'\"#000000\"\',\'\"#00FFFF\"\',\'\"#FF00FF\"\',\'\"#FFFF00\"\'D [07/Feb/2026:12:28:14 +0100] cupsdMarkDirty(P----)D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] ATTR: marker-high-levels=100,100,100,100D [07/Feb/2026:12:28:14 +0100] cupsdMarkDirty(P----)D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] ATTR: marker-levels=58,88,100,3D [07/Feb/2026:12:28:14 +0100] cupsdMarkDirty(P----)D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] ATTR: marker-low-levels=15,15,15,15D [07/Feb/2026:12:28:14 +0100] cupsdMarkDirty(P----)D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] ATTR: marker-names=\'\"Black ink\"\',\'\"Cyan ink\"\',\'\"Magenta ink\"\',\'\"Yellow ink\"\'D [07/Feb/2026:12:28:14 +0100] cupsdMarkDirty(P----)D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] ATTR: marker-types=\'\"ink-cartridge\"\',\'\"ink-cartridge\"\',\'\"ink-cartridge\"\',\'\"ink-cartridge\"\'D [07/Feb/2026:12:28:14 +0100] cupsdMarkDirty(P----)D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] final_content_type=\"application/vnd.cups-raster\", document_format=\"application/octet-stream\"D [07/Feb/2026:12:28:14 +0100] [Job 58] retryable=1D [07/Feb/2026:12:28:14 +0100] cupsdMarkDirty(----S)D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] Validate-Job IPP/2.0D [07/Feb/2026:12:28:14 +0100] [Job 58] printer-uri=\"ipp://192.168.43.101:631/\"D [07/Feb/2026:12:28:14 +0100] [Job 58] requesting-user-name=\"anonymous\"D [07/Feb/2026:12:28:14 +0100] [Job 58] job-name=\"Test Page\"D [07/Feb/2026:12:28:14 +0100] [Job 58] document-format=\"application/octet-stream\"D [07/Feb/2026:12:28:14 +0100] [Job 58] IPP/2.0 Validate-Job #2D [07/Feb/2026:12:28:14 +0100] [Job 58] ---- operation-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-charset charset utf-8D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-natural-language naturalLanguage it-itD [07/Feb/2026:12:28:14 +0100] [Job 58] printer-uri uri ipp://192.168.43.101:631/D [07/Feb/2026:12:28:14 +0100] [Job 58] requesting-user-name nameWithoutLanguage anonymousD [07/Feb/2026:12:28:14 +0100] [Job 58] job-name nameWithoutLanguage Test PageD [07/Feb/2026:12:28:14 +0100] [Job 58] document-format mimeMediaType application/octet-streamD [07/Feb/2026:12:28:14 +0100] [Job 58] ---- end-of-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] [Notifier] state=3D [07/Feb/2026:12:28:14 +0100] [Notifier] state=3D [07/Feb/2026:12:28:14 +0100] [Notifier] PrinterStateChangedD [07/Feb/2026:12:28:14 +0100] [Job 58] IPP/2.0 Get-Printer-Attributes #3D [07/Feb/2026:12:28:14 +0100] [Job 58] ---- operation-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-charset charset utf-8D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-natural-language naturalLanguage it-itD [07/Feb/2026:12:28:14 +0100] [Job 58] printer-uri uri ipp://192.168.43.101:631/D [07/Feb/2026:12:28:14 +0100] [Job 58] requesting-user-name nameWithoutLanguage anonymousD [07/Feb/2026:12:28:14 +0100] [Job 58] requested-attributes 1setOf keyword compression-supported,copies-supported,cups-version,document-format-supported,job-password-encryption-supported,marker-colors,marker-high-levels,marker-levels,marker-low-levels,marker-message,marker-names,marker-types,media-col-supported,multiple-document-handling-supported,operations-supported,print-color-mode-supported,printer-alert,printer-alert-description,printer-is-accepting-jobs,printer-mandatory-job-attributes,printer-state,printer-state-message,printer-state-reasonsD [07/Feb/2026:12:28:14 +0100] [Job 58] ---- end-of-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4708] Server address is "/run/cups/cups.sock".D [07/Feb/2026:12:28:14 +0100] [Client 4708] Accepted from localhost (Domain)D [07/Feb/2026:12:28:14 +0100] [Client 4708] Waiting for request.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4709] Server address is "/run/cups/cups.sock".D [07/Feb/2026:12:28:14 +0100] [Client 4709] Accepted from localhost (Domain)D [07/Feb/2026:12:28:14 +0100] [Client 4709] Waiting for request.D [07/Feb/2026:12:28:14 +0100] [Client 4708] POST / HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4708] Read: status=200, state=6D [07/Feb/2026:12:28:14 +0100] [Client 4708] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 4708] 2.0 Get-Notifications 1819D [07/Feb/2026:12:28:14 +0100] Get-Notifications /D [07/Feb/2026:12:28:14 +0100] cupsdIsAuthorized: requesting-user-name="zambo"D [07/Feb/2026:12:28:14 +0100] [Client 4708] Returning IPP successful-ok for Get-Notifications (/) from localhost.D [07/Feb/2026:12:28:14 +0100] [Client 4708] Content-Length: 582D [07/Feb/2026:12:28:14 +0100] [Client 4708] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:14 +0100] [Client 4708] con->http=0x55910f19a360D [07/Feb/2026:12:28:14 +0100] [Client 4708] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=582, response=0x55910f10ec30(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:14 +0100] [Client 4708] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:14 +0100] [Client 4708] bytes=0, http_state=0, data_remaining=582D [07/Feb/2026:12:28:14 +0100] [Client 4708] Flushing write buffer.D [07/Feb/2026:12:28:14 +0100] [Client 4708] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:14 +0100] [Client 4708] Waiting for request.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4709] POST / HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4709] Read: status=200, state=6D [07/Feb/2026:12:28:14 +0100] [Client 4709] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 4709] 2.0 Get-Notifications 5519D [07/Feb/2026:12:28:14 +0100] Get-Notifications /D [07/Feb/2026:12:28:14 +0100] cupsdIsAuthorized: requesting-user-name="zambo"D [07/Feb/2026:12:28:14 +0100] [Client 4709] Returning IPP successful-ok for Get-Notifications (/) from localhost.D [07/Feb/2026:12:28:14 +0100] [Client 4709] Content-Length: 582D [07/Feb/2026:12:28:14 +0100] [Client 4709] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:14 +0100] [Client 4709] con->http=0x55910f19ec80D [07/Feb/2026:12:28:14 +0100] [Client 4709] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=582, response=0x55910f0b27b0(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:14 +0100] [Client 4709] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:14 +0100] [Client 4709] bytes=0, http_state=0, data_remaining=582D [07/Feb/2026:12:28:14 +0100] [Client 4709] Flushing write buffer.D [07/Feb/2026:12:28:14 +0100] [Client 4709] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:14 +0100] [Client 4709] Waiting for request.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4708] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)D [07/Feb/2026:12:28:14 +0100] [Client 4708] Closing connection.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 24] POST /printers/Epson-WF-2630 HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 24] Read: status=200, state=6D [07/Feb/2026:12:28:14 +0100] [Client 24] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 24] 2.0 Get-Printer-Attributes 1820D [07/Feb/2026:12:28:14 +0100] Get-Printer-Attributes ipp://localhost/printers/Epson-WF-2630D [07/Feb/2026:12:28:14 +0100] [Client 24] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Epson-WF-2630) from localhost.D [07/Feb/2026:12:28:14 +0100] [Client 24] Content-Length: 140D [07/Feb/2026:12:28:14 +0100] [Client 24] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:14 +0100] [Client 24] con->http=0x55910f150540D [07/Feb/2026:12:28:14 +0100] [Client 24] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=140, response=0x55910f187440(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:14 +0100] [Client 24] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:14 +0100] [Client 24] bytes=0, http_state=0, data_remaining=140D [07/Feb/2026:12:28:14 +0100] [Client 24] Flushing write buffer.D [07/Feb/2026:12:28:14 +0100] [Client 24] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:14 +0100] [Client 24] Waiting for request.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4710] Server address is "/run/cups/cups.sock".D [07/Feb/2026:12:28:14 +0100] [Client 4710] Accepted from localhost (Domain)D [07/Feb/2026:12:28:14 +0100] [Client 4710] Waiting for request.D [07/Feb/2026:12:28:14 +0100] [Client 4710] GET /printers/Epson-WF-2630.ppd HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4710] Read: status=200, state=3D [07/Feb/2026:12:28:14 +0100] [Client 4710] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 4710] Processing GET /printers/Epson-WF-2630.ppdD [07/Feb/2026:12:28:14 +0100] [Client 4710] filename="/etc/cups/ppd/Epson-WF-2630.ppd", type=application/vnd.cups-ppdD [07/Feb/2026:12:28:14 +0100] [Client 4710] cupsdSendHeader: code=304, type="(null)", auth_type=0D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 12] POST /printers/Epson-WF-2630 HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 12] Read: status=200, state=6D [07/Feb/2026:12:28:14 +0100] [Client 12] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 12] 2.0 Get-Printer-Attributes 5520D [07/Feb/2026:12:28:14 +0100] Get-Printer-Attributes ipp://localhost/printers/Epson-WF-2630D [07/Feb/2026:12:28:14 +0100] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Epson-WF-2630) from localhost.D [07/Feb/2026:12:28:14 +0100] [Client 12] Content-Length: 140D [07/Feb/2026:12:28:14 +0100] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:14 +0100] [Client 15] POST / HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 15] Read: status=200, state=6D [07/Feb/2026:12:28:14 +0100] [Client 15] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 15] 2.0 Get-Printer-Attributes 5521D [07/Feb/2026:12:28:14 +0100] Get-Printer-Attributes ipp://localhost/printers/Epson-WF-2630D [07/Feb/2026:12:28:14 +0100] [Client 15] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Epson-WF-2630) from localhost.D [07/Feb/2026:12:28:14 +0100] [Client 15] Content-Length: 39842D [07/Feb/2026:12:28:14 +0100] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:14 +0100] [Client 12] con->http=0x55910f13cce0D [07/Feb/2026:12:28:14 +0100] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=140, response=0x55910f0cbf00(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:14 +0100] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:14 +0100] [Client 12] bytes=0, http_state=0, data_remaining=140D [07/Feb/2026:12:28:14 +0100] [Client 12] Flushing write buffer.D [07/Feb/2026:12:28:14 +0100] [Client 12] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:14 +0100] [Client 12] Waiting for request.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 15] con->http=0x55910f140440D [07/Feb/2026:12:28:14 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=39842, response=0x55910f0bc620(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:14 +0100] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:14 +0100] [Client 15] bytes=0, http_state=0, data_remaining=39842D [07/Feb/2026:12:28:14 +0100] [Client 15] Flushing write buffer.D [07/Feb/2026:12:28:14 +0100] [Client 15] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:14 +0100] [Client 15] Waiting for request.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4710] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)D [07/Feb/2026:12:28:14 +0100] [Client 4710] Closing connection.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Job 58] Validate-Job: client-error-bad-request (client-error-bad-request)D [07/Feb/2026:12:28:14 +0100] [Job 58] ---- operation-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-charset charset utf-8D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-natural-language naturalLanguage en-usD [07/Feb/2026:12:28:14 +0100] [Job 58] ---- end-of-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] [Job 58] Create-Job IPP/2.0D [07/Feb/2026:12:28:14 +0100] [Job 58] printer-uri=\"ipp://192.168.43.101:631/\"D [07/Feb/2026:12:28:14 +0100] [Job 58] requesting-user-name=\"anonymous\"D [07/Feb/2026:12:28:14 +0100] [Job 58] job-name=\"Test Page\"D [07/Feb/2026:12:28:14 +0100] [Job 58] IPP/2.0 Create-Job #4D [07/Feb/2026:12:28:14 +0100] [Job 58] ---- operation-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-charset charset utf-8D [07/Feb/2026:12:28:14 +0100] [Job 58] attributes-natural-language naturalLanguage it-itD [07/Feb/2026:12:28:14 +0100] [Job 58] printer-uri uri ipp://192.168.43.101:631/D [07/Feb/2026:12:28:14 +0100] [Job 58] requesting-user-name nameWithoutLanguage anonymousD [07/Feb/2026:12:28:14 +0100] [Job 58] job-name nameWithoutLanguage Test PageD [07/Feb/2026:12:28:14 +0100] [Job 58] ---- end-of-attributes-tag ----D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4711] Server address is "/run/cups/cups.sock".D [07/Feb/2026:12:28:14 +0100] [Client 4711] Accepted from localhost (Domain)D [07/Feb/2026:12:28:14 +0100] [Client 4711] Waiting for request.D [07/Feb/2026:12:28:14 +0100] [Client 4711] GET /printers/Epson-WF-2630.ppd HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4711] Read: status=200, state=3D [07/Feb/2026:12:28:14 +0100] [Client 4711] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 4711] Processing GET /printers/Epson-WF-2630.ppdD [07/Feb/2026:12:28:14 +0100] [Client 4711] filename="/etc/cups/ppd/Epson-WF-2630.ppd", type=application/vnd.cups-ppdD [07/Feb/2026:12:28:14 +0100] [Client 4711] cupsdSendHeader: code=304, type="(null)", auth_type=0D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4711] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)D [07/Feb/2026:12:28:14 +0100] [Client 4711] Closing connection.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 12] POST /printers/Epson-WF-2630 HTTP/1.1D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 12] Read: status=200, state=6D [07/Feb/2026:12:28:14 +0100] [Client 12] No authentication data provided.D [07/Feb/2026:12:28:14 +0100] [Client 12] 2.0 Get-Printer-Attributes 5522D [07/Feb/2026:12:28:14 +0100] Get-Printer-Attributes ipp://localhost/printers/Epson-WF-2630D [07/Feb/2026:12:28:14 +0100] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Epson-WF-2630) from localhost.D [07/Feb/2026:12:28:14 +0100] [Client 12] Content-Length: 140D [07/Feb/2026:12:28:14 +0100] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0D [07/Feb/2026:12:28:14 +0100] [Client 12] con->http=0x55910f13cce0D [07/Feb/2026:12:28:14 +0100] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=140, response=0x55910f10ec30(IPP_STATE_DATA), pipe_pid=0, file=-1D [07/Feb/2026:12:28:14 +0100] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0D [07/Feb/2026:12:28:14 +0100] [Client 12] bytes=0, http_state=0, data_remaining=140D [07/Feb/2026:12:28:14 +0100] [Client 12] Flushing write buffer.D [07/Feb/2026:12:28:14 +0100] [Client 12] New state is HTTP_STATE_WAITINGD [07/Feb/2026:12:28:14 +0100] [Client 12] Waiting for request.D [07/Feb/2026:12:28:14 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"D [07/Feb/2026:12:28:14 +0100] [Client 4709] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)D [07/Feb/2026:12:28:14 +0100] [Client 4709] Closing connection.there is a "closing for error 32 (Broken pipe)" and in the middle "printing process has not been accepted" error ("il processo di stampa non è stato accettato" in italian)...
Mybe it could be a good idea to change the printer 
Statistics: Posted by stilnovo — 2026-02-07 11:46