Hello,
I'm glad you got sorted.
For the benefits of other readers in the future, the complete model name of your computer is a HPE ProLiant ML30 Gen9 Server [1].
To complement what you have already reported in the previous post, the "UEFI Deployment Guide for HPE ProLiant Gen9 and Synergy Servers" [2] documents at paragraph "Local HDD boot in UEFI mode" the following instructions:
You can manually prefix the subject of the first post with the tag "[Solved]" to mark is solved (i.e. "[Solved] Simple Debian 12 install don't boot with HPE ProLiant ML30 Gen9 Server")
Happy Debian! :D
--
[1] HPE ProLiant ML30 Gen9 Server
[2] UEFI Deployment Guide for HPE ProLiant Gen9 and Synergy Servers
I'm glad you got sorted.
For the benefits of other readers in the future, the complete model name of your computer is a HPE ProLiant ML30 Gen9 Server [1].
To complement what you have already reported in the previous post, the "UEFI Deployment Guide for HPE ProLiant Gen9 and Synergy Servers" [2] documents at paragraph "Local HDD boot in UEFI mode" the following instructions:
For the benefit of other readers with the same question, it would be useful to add the model name to the subject of the first post (i.e. "Simple Debian 12 install don't boot with HPE ProLiant ML30 Gen9 Server")HDD boot configuration
You can boot from a local hard disc drive, including one that is attached to an embedded SATA or embedded (SAS-based) Smart Array controller, in either UEFI Mode or Legacy BIOS Mode. The following describes local HDD boot in UEFI Mode.
Embedded SATA support
To boot from a local SATA hard disk drive that is attached to an embedded SATA, you must enable the appropriate SATA controller for your installed OS. Depending on your server model, either SATA AHCI or Dynamic Smart Array RAID support are enabled by default.
CAUTION: Dynamic Smart Array is not supported when your boot mode is configured to Legacy BIOS Mode. You must use UEFI Mode when enabling Dynamic Smart Array RAID to avoid data loss or data corruption on existing SATA drives. Back up all drives before enabling this option. See your operating system documentation before enabling SATA AHCI support to ensure your base media drivers support this feature.
Enabling Embedded SATA support
Prerequisite
For partitions larger than 2.2 TB, boot mode is set to UEFI Mode.
To enable Embedded SATA support:
1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration (RBSU)→System Options→SATA Controller Options→Embedded SATA Configuration and press Enter.
2. Ensure that you are using the correct AHCI or RAID system drivers for your SATA option.
3. Select a setting and press Enter:
• Enable SATA AHCI Support—Enables the embedded chipset SATA controller for AHCI.
• Enable HP Dynamic Smart Array RAID Support—Enables the embedded chipset SATA controller for Dynamic Smart Array RAID.
4. Press F10.
5. In UEFI mode, move this UEFI boot option to the top of the UEFI boot order list as described in Changing the UEFI Boot Order list.
6. Reboot the server.
You can manually prefix the subject of the first post with the tag "[Solved]" to mark is solved (i.e. "[Solved] Simple Debian 12 install don't boot with HPE ProLiant ML30 Gen9 Server")
Happy Debian! :D
--
[1] HPE ProLiant ML30 Gen9 Server
[2] UEFI Deployment Guide for HPE ProLiant Gen9 and Synergy Servers
Statistics: Posted by Aki — 2024-09-30 19:45